Age 110 – Sony R-DG1200 User Manual
Page 110
110
US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm
masterpage: Left
STR-DG1200
3-289-135-11(1)
4
Press
V/v repeatedly to select “E.SUR
MODE”, then press
or
b.
5
Press
V/v repeatedly to select the
Enhanced Surround mode you want,
then press
.
Note
The selected Enhanced Surround mode can only be
applied if you have selected “E.SURROUND” by
pressing A.F.D. repeatedly.
Press 2CH/A.DIRECT repeatedly to
select “A. DIRECT”.
For details on the tuner function, see “Tuner
Operations” (page 69).
Tuning radio stations
1
Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO”, then turn
TUNING +/– to select the stations.
Selecting a frequency directly
(Direct tuning)
1
After selecting the FM or AM band,
press SHIFT, then press D.TUNING.
2
Press the numeric buttons to enter the
frequencies, then press
to enter.
1
Tune in the station that you
want to preset.
For details on the operation, see “Tuning
radio stations”.
2
Press SHIFT, then press ENT/
MEM.
“MEM” lights up on the display window
for a few seconds. Perform steps 3 and 4
before “MEM” disappears.
3
Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEM” disappears before
you select the preset number, start again
from step 2.
4
Press ENT/MEM.
The station is stored as the selected preset
number. If “MEM” disappears before you
press ENT/MEM, start again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1
Press TUNER repeatedly to select the
FM or AM band.
2
Press PRESET + or PRESET –
repeatedly to select the preset station
you want.
You can also press SHIFT, then press the
numeric buttons to select the preset station
you want. Then, press
to enter the
selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET”,
then turn TUNING +/– to select the preset
stations you want.
Listening to the sound without
any adjustment (ANALOG
DIRECT)
Listening to the FM/AM radio
Presetting radio stations