Sharp FP-P40CX - Manual (Page 17)

ENGLISH
FRANÇAIS
ESPAÑOL
CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including
the sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug
with wet hands. Electrical shock and/or bodily injury may occur as a result.
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water
ODOR SENSOR
Opening of odor
sensor
Odor Sensor
Main Unit
True HEPA Filter
Washable Active Carbon Filter
Pre-Filter
Do not wash the True HEPA Filter.
Washing will not improve filter performance, and
it may even cause electric shock or malfunction.
The sensitivity of the sensor will become
unstable if the sensor is dirty or blocked.
Remove dust from the surfaces of the sen-
sor openings using a vacuum cleaner.
E-15
MAIN UNIT
PRE-FILTER
As shown in the figure, clean the top
surface of the Pre- Filter lightly with a
vacuum cleaner.
When Pre- Filter is very dirty, wash it in
water with mild kitchen detergent and dry
Pre-Filter well in the shade.
Pre-Filter