Sundance Spas CAMDEN 780 - Manual (Page 47)

Page 43
780 SERIES
14.3 Poor jet Action
1. Press the JETS 1 button to make certain the pump #1 is on.
2. Rotate the air control clockwise to the “on” position.
3. Check for dirty filter. Clean, if necessary.
4. Make sure jets are all the way open.
14.4 Water is Too Hot
Reduce thermostat setting so the heater turns off.
14.5 No Heat
1. Check thermostat setting.
2. Keep the spa cover in place while heating.
3. Check the settings to see if your spa is in economy filtration/heating
mode (pages 29-30).
Should checking the above steps fail to correct the problem, please
call your dealer so that they may arrange service. We build the best
spas in the industry. Nonetheless, we are always striving to improve
the quality and features of our products. Your input as a Sundance spa
owner is a cherished part of this process. If you have any comments or
suggestions, or if you wish to be informed on any new products for your
spa, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest
and most relaxed family in the world!