User interaction with sim at – Sony Ericsson J100 User Manual
Page 17
White Paper
J100
17
February 2006
User Interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS coded) is
supported.
Text clearing times are 2-35 seconds and a 30-sec-
ond time-out limit for the user to clear the text.
‘Key’ responses:
•
‘Long Back’ – Proactive session terminated by
user.
•
‘Back’ – Backward move in proactive session.
‘OK’/‘Back’/‘Long Back’ clears the display if the
command is performed successfully.
Get inkey
Prompt for a one-character input. Pressing ‘Ok’
without entering a character gives warning mes-
sage “Minimum 1 character”. ‘Key’ responses:
•
‘C’ clears current character.
•
‘Long Back’ terminates the proactive session.
•
‘Back’ – Backward move in proactive session.
•
‘OK’ – Command performed successfully.
Get input
Prompt for character input. The phone will refuse to
accept further input when maximum response
length is exceeded. UI Maximum Response
lengths:
•
Digits Only – 160 characters.
•
SMS default alphabet characters – 160 charac-
ters.
•
Hidden Characters (digits only) – 20 characters.
‘Key’ responses:
•
‘C’ clears current character.
•
‘Long Back’ terminates the proactive session.
•
‘Back’ – Backward move in proactive session.
•
‘OK’ – Command performed successfully.
Select item
Scroll to highlight item for selection. ‘Key’
responses:
•
Navigational key press down – Scroll down list.
•
Navigational key press up – Scroll up list.
•
Long ‘Back’ terminates proactive session.
•
‘Back’ – Backward move in proactive session.
•
‘OK’– Command performed successfully.
Send short message
Default message “Sending message, please wait”
can be replaced for the Alpha Identifier text, or sup-
pressed completely if a null text is provided.
Default responses are “MESSAGE FAILED” or
“MESSAGE SENT”. ‘Key’ responses:
•
Long ‘Back’ or ‘Back’ ends the proactive ses-
sion.
Set up menu
Incorporates a SIM Application Toolkit Menu Item
into J100 main menu structure.
If an Alpha Identifier is supplied in the Set Up Menu
command, this is used as the SIM AT entry in J100
main menu. If no alpha identifier is supplied and
several items are found in the menu, a default title
is used. If the SIM AT Menu Item is selected by
pressing ‘Select’, all the items sent in the Set Up
Menu command will be available for selection, in
the same way as the Select Item command.
CLOSE CHANNEL
No
RECEIVE DATA
No
SEND DATA
No
GET CHANNEL STATUS
No
Service Mode
Support