Poor, 143 ad ditional inf o rmation, Headphones with remote control other issues – Sony PSP-1003 User Manual

Page 143

Advertising
background image

143

Ad
ditional inf

o

rmation

Troubleshooting

, Depending on the access point setting, you may need to enter the system's

MAC address (

page 100).

, When communicating with another system in Ad Hoc Mode, both systems

must be set to the same channel (

page 111).

The Web page won't display properly.
, Some Web pages may not display properly.

There is no sound, or the sound quality from the Headphones is
poor.
, Check that the Headphones are fully inserted into the system (

page 27).

, Check that the headset connector and the headphone plug are clean. If not,

wipe them with a dry, soft cloth. See also "There is no sound."
(

page 139).

, The ear friendly Headphones are specifically designed to limit sound

pressure level to a maximum of 90dB.

The Remote Control does not work.
, Check that the Headphones are fully inserted in the system (

page 27).

, Check that the Remote Control is not in Hold Mode. If it is, clear Hold

Mode (

page 23).

The system or AC Adaptor is warm.
, During use, the system or AC Adaptor may become warm. This is not a

malfunction.

The system is turned on, but does not operate.
, Check that the system is not in Hold Mode. If it is, slide the POWER/HOLD

switch up to clear Hold Mode (

page 34).

Headphones with Remote Control

Other issues

Advertising