Shenzhen High Power Tech H7920 User Manual
Page 25
Galaxy H7920 Mobile Router User Manual
Chapter 3: Router Configuration
M80-792001-01
39
For Example:
192.168.2.11
192.168.3.1
Network
Network
192.168.8.1
192.168.2.33
192.168.2.55
192.168.5.1
192.168.8.22
192.168.3.44
192.168.5.66
192.168.2.11
192.168.2.11
192.168.3.1
Network
Network
192.168.8.1
192.168.2.33
192.168.2.33
192.168.2.55
192.168.2.55
192.168.5.1
192.168.8.22
192.168.3.44
192.168.5.66
With the route policy showing above picture, the data envelops must be
transferred by gateway (192.168.2.33) if the transmitting data envelops are
from host 192.168.8.22 to 192.168.3.44.
Similarly, the data must be transferred by the gateway (192.168.2.55) if the
transmitting data envelops are from host 192.168.8.22 to 192.168.5.66.
Save the settings when it is completed.
Note: The IP addresses on the picture are not the real addresses; it is used for
description only. Additionally, gateway IP address should be a static IP address
at real engineering.
Galaxy H7920 Mobile Router User Manual
Chapter 3: Router Configuration
M80-792001-01
40
3.2.6 Special Setting
Galaxy router is not only integrated with router functionality, but also can be
configured for many other applications. The Special Setting function is designed
for industries and utilities. Several parameters can be configured accordingly.
With the Special Setting, a non IP based device (such as RS-232 interface POS)
data can be transmitted over Internet. There are many applications of center to
multi-point infrastructure, such as video surveillance system and SCADA system,
etc.
The Special Setting is designed for industrial application. It is not necessary to
set up special parameters if you are planning to use only route features, and the
default setting is “Disable”. The Data Service Center and associated parameters
should be configured properly if the Galaxy router is used for remote
management and surveillance.
Click “Start”->"Special Setting", the below picture will be displayed.
There are four sub-menus in "Special Setting".
DTU Setting
Serial Port Setting
Operation Mode
Backup Routing
DTU Setting
Click "Start"->"Special Setting"->"DTU Setting" menu to start this setup page.