Sherwood DD-6200 - Manual (Page 15)

MEMORIZING THE SPECIFIC POINT
1 5
n each counter mode, you can reset the counter to
“0000” or “00 min. 00 sec.”.
Example) In the tape counter mode.
Select the Deck A or the Deck B counter mode as
desired.
“ ” of the selected deck is flickering for 3
seconds and the corresponding deck counter mode is
displayed.
When the unit is in the stop mode displaying a deck
counter mode, playing or recording, etc. on the other
deck changes the deck counter mode to the other.
Resetting the counter Selecting the desired deck counter mode
At the desired point, press the MEMORY button to memorize.
This function is helpful to listen to the specific passage.
“ MEMO” lights up and the specific point is memorized.
If the FAST FORWARD or the REWIND button is pressed in the stop mode, winding the tape stops at
the memorized point.
To cancel, press this button or open the corresponding cassette door.
RESET
MEMORY
A/B