Sinclair Manual Grommet Machine PG20 - Manual (Page 2)

INTRODUCTION
MANUAL MACHINE MODEL PG-20 FOR PLACING APPLICATIONS BY HAND
The function of this machine is the placement of applications or to punch holes (interior
diameter of tube grommet 8mm or 12mm) in materials that need these applications.
Specially recommended for placing grommets and washers in: awnings, curtains, advertising
signs, etc.
THIS MACHINE WILL PUNCH THE MATERIAL WHILE SIMULTANEOUSLY SETTING THE GROMMET.
WARNINGS!
We hope you will take notice of these warnings and we would like to thank you for the
purchase of this machine.
User unawareness of the machine leads on many occasions to elementary doubts about its
operation.
Please read this instruction manual carefully for your guidance, in order to make the most of
your machine.
Always use extreme caution when operating machine. Keep hands free of cutting surfaces.
SINCLAIR EQUIPMENT DECLINES ALL RESPONSABILITY ON THE INCORRECT USE
OF THIS INSTRUCTION MANUAL.
Grommet Grommet Measurements Washer Measurements
8mm Plastic Grommet A: 8mm
B: 15mm
C: 8mm No washer is used for
8mm grommet.
12mm Plastic Grommet A: 12mm
B: 26mm
C: 8.3mm
A: 15mm
B: 24mm