Socket Mobile Secure Digital Scan Card Series 3 - Manual (Page 30)

Scan Test
1. In the main screen of SocketScan, make sure the SDSC scanner
is enabled and tap Test.
2. Tap Scan to trigger the scanner and scan a bar code.
You cannot use the hardware trigger button for the
scan test. Use the Scan button to trigger the scanner.
3. SocketScan will report the encoded data, as well as its
symbology type and length. To view the data in hexadecimal
format, check View as Hex.
4. When done, tap OK to exit the Test Scan.
30