Steamfast SF-407 - Manual (Page 6)

6 | ENGLISH
TELESCOPIC POLE
The Telescopic Pole is made up of four sections (FIGURE 1):
• TOP (SECTION 1)
• MIDDLE-TOP (SECTION 2)
• MIDDLE-BOTTOM (SECTION 3)
• BOTTOM (SECTION 4)
SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks, these sections
may be extended or retracted in order to achieve the desired length. Refer to Adjusting Telescopic
Pole section below for more details.
NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This section
includes the COUPLING, which secures the Telescopic Pole to the Pole Base.
CONNECTING TELESCOPIC POLE
1. Locate COUPLING on SECTION 4 of Telescopic
Pole. The Telescopic Pole is packed with COUPLING
already on SECTION 4 – if the COUPLING has fallen
off, simply slide it back on as shown in FIGURE 1.
2. Look down inside Pole Base, and locate two guide
ridges (FIGURE 2-A). Align two guide grooves on
Telescopic Pole (FIGURE 2-B) with guide ridges
inside Pole Base.
3. With guide grooves aligned with guide ridges, insert
SECTION 4 of Telescopic Pole into Pole Base
(FIGURE 2-C).
NOTE: If you have trouble locating two guide
ridges inside Pole Base, insert SECTION 4 of
Telescopic Pole into Pole Base, then twist Pole to
properly align the guide grooves and guide ridges.
4. Slide COUPLING down over Pole Base, then screw
clockwise to lock Telescopic Pole in place
(FIGURE 2-D). Telescopic Pole should now be
secured to the Pole Base.
Assembling Your
Everyday Fabric Steamer
FIGURE 1
FIGURE 2
2-A
2-B
2-C 2-D