Soleus Air FS1-40R-41 - Manual (Page 7)

OPERATING INSTRUCTIONS
Using Fan Controls
1) Set the fan on a stable, level surface.
2) Turn the fan on by pressing the Power/Speed button located below the Multi-Color
display, or the On/Speed button on the Remote Control.
3) Adjust the speed setting by pressing the Power/Speed. To adjust the speed
setting using the remote, press the On/Speed button.
4) Pressing the Mode button on either the fan or the remote will choose the desired
wind mode: Standard, Natural, Work/Sleep. In standard mode the fan operates at
a steady speed. Natural mode simulates the wind by alternating the speed of the
fan. In Work/Sleep mode the fan decreases speed in the middle of the oscillation
pattern.
5) To oscillate the fan head, press the Swing button located on the fan or the remote.
6) This fan includes a 7.5 hour timer. To operate the timer, press the Timer button
(located on the fan & remote) until the desired time is visible on the Multi-Colored
Display. Each button press will increase the time by 10 minute increments.
7) To turn the fan off, press the Power/Speed button on the fan, or the Off button on
the remote control.
Adjusting Height and Fan Head Tilt
• To adjust the height of the fan, turn the Adjustable Height Knob (L) counter-
clockwise to loosen the stand. Adjust the fan to the desired height, then firmly
tighten to secure into place.
• To adjust the tilt on the Fan Head, loosen the knob below the Motor Housing and
tilt the fan forward/back by pulling or pushing the top of the Fan Grill. The fan will
make a clicking noise while being adjusted. Once the Fan Head is set to the
desired tilt, tighten the knob to secure into place.
7