Stinger MC POWER SYSTEM MC2 - Manual (Page 32)

Chapter 5: Charging the Power System MC 2 Power Systems User's Guide
1110227 Revision 2
20 November 2006
Circuit Protection
The MC² Power System is thermally protected and self-resetting. For more information,
see “
No Output Reset Procedure .” The cooling fan maintains a constant ambient
temperature inside the electrical enclosure.
Deep Discharge Protection
Deep discharge of the power system will significantly reduce its cycle life. After the
power to the load is disabled, the internal circuitry goes into suspend mode to prevent the
power system from reaching a level of deep discharge. To reduce this risk, the MC²
Power System will shut down and cut off the output voltage.