StorageTek StorageNet 4000 - Manual (Page 32)

Zone Commands
4-6 8946121502
zoneRemove
Figure 4-14 shows the zoneRemove command. This command removes one or more
zone_members from an existing zone.
Figure 4-14 zoneRemove Command
When removing multiple members order is important, the members removed are found by an
exact string match. If this command results in all members being removed, the zone is deleted.
zoneShow
Figure 4-15 shows the zoneShow command. This command prints the specified zone definition
if a parameter is given (otherwise all zone configuration information is printed).
Figure 4-15 zoneShow Command
admin> zoneRemove “Blue_zone”, “array2”
value = 0 = 0x0
admin> zoneShow
Defined configuration:
cfg: USA_cfg Red_zone; Blue_zone; Green_zone
zone: Blue_zone
0,1; array1; 0,2; array2
zone: Red_zone
0,0; loop1
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
Effective configuration:
cfg: USA_cfg
zone: Blue_zone
0,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
0,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Red_zone
0,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
value = 1 = 0x1