Sanyo DUAL CAMERA VPC-PD1TA - Manual (Page 11)

English
x
Copy data from your camera to the computer
Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera’s USB terminal and the
computer’s USB connector.
<Insert and pull out the cable and USB plug carefully>
i When connecting the cables, make sure that the plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the terminal or the
camera.
i If excessive force is used to pull the USB plug, it may damage the cable
and/or connector.
Supplied dedicated USB interface cable
To USB terminal
To USB connector on the computer
Computer power switch
• ON
Camera on/off switch
• OFF
Push