Savin 1045 - Manual (Page 146)

Key Operator Setting
132
8
Forwarding
Using this feature, you can select
messages from Specified Senders to
be printed on your machine, and then
sent on to another fax machine.
This is useful if, for example, you are
visiting another office and would like
a copy of your messages sent to that
office so you can read them.
Preparation
Before using this function, you
should specify the "Forwarding"
function in "Reception Mode" and
that it is set to on.
You can specify the End Receiver sep-
arately, according to the Special Send-
ers. If you do not specify the Special
Sender, the messages are forwarding
to the specified receiver.
Limitation
❒ The Forwarding function does not
forward messages received with Con-
fidential Reception, Memory Lock,
Polling Reception mode, or messages
received by Transfer Request.
❒ You can program a sender with
Quick Dial Table and Groups. You
cannot program a sender with
Groups that have destinations
specified as transfer stations.
Note
❒ One receiver can be specified with
this function. If you want more re-
ceivers, select Group Dial.
❒ You can print a forwarding mark
on messages that are forwarded.
⇒
P.136 “Changing the User Parame-
ters”(Switch02, Bit0)
❒ You can specify whether or not to
print forwarded messages. The de-
fault setting is on.
⇒ P.136 “Chang-
ing the User Parameters”(Switch11,
Bit6)
Programing Forwarding Stations
A
Press the
{{{{User Tools/Counter}}}} key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
The Key Operator Tools menu is
shown.
D
Select [Forwarding].
Note
❒ If "Forwarding" is not shown,
press [
U U U U Prev.] or [T T T T Next].