Replacing the lamp, How to replace the lamp – Sony KDF-E42A10 User Manual
Page 86
Other Information
86
D:\WINNT\Profiles\noriko\Desktop\Troy EN2\2597544121\01US08OTH.fm
masterpage:3 columns Right
KDF-E42A10/KDF-E50A10
2-597-544-12(1)
Replacing the Lamp
The projection lamp, which illuminates the picture, has a limited life.
If the screen becomes dark, the color looks unusual, or the LAMP indicator
on the front of the TV flashes, it is time to replace the lamp with a new one
(not supplied).
❑
Use a Sony XL-2400 replacement lamp (not supplied) for replacement.
Use of any other lamp may damage the TV.
❑
Do not remove the lamp for any purpose other than replacement. Doing
so may cause injury or fire.
❑
Do not put flammable materials and metal objects inside the lamp
receptacle of the TV after removing the lamp. Doing so may cause fire
or electrical shock. Do not touch the lamp receptable once the lamp has
been removed.
❑
When the lamp eventually burns out, you may hear a noticeable pop
sound. This is normal and it is inherent to this type of lamp.
❑
In rare instances, the bulb may pop inside the lamp unit, but the lamp
unit is designed to contain all of the broken glass pieces inside the lamp
unit.
❑
The lamps contain mercury. For proper disposal of the used lamps,
follow and observe the local ordinances. See page 89.
How to Replace the
Lamp
1
Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2
Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it. To avoid being burned, do not
touch the lamp receptable once the lamp has been removed.
3
Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
WARNING
Electric appliances can cause fire or high temperature, resulting in
injury or death. Be sure to follow the instructions below.
✍
Do not shake the lamp. Vibration can damage the lamp or
shorten its life.
✍
Avoid touching the front glass of a new lamp or the glass of
the lamp receptacle. This may reduce picture quality or lamp
life.