Siemens 2010 Tango - Manual (Page 46)

Handset settings
36
kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Activating/deactivating notification and warning tones
It is possible to switch the following notification tones on
and off:
● Key confirmation
● Battery warning
● Range warning
● Positive confirmation
● Error beep
● Synchronization tone
All tones can be activated/deactivated in the same way:
B 3 Start the procedure. Follow with:
Procedure Description Default
1
Key confirmation: confirms each key stroke on
2
Battery warning: warns when the battery charge is too
low
on
3
Range warning: warns if the handset is too far away from
the base station
off
7
Positive confirmation: confirms correctly completed set-
tings
on
4
Error beep: signals an incorrect entry on
5
Synchronization tone: sounds when a handset which
was too far from the base station has moved back into
range
off
1
B Activate the tone.
0 B Deactivate the tone.