Sterling Plumbing Shower System with Backer Boards 72120106 - Manual (Page 2)

Technical Information
Model Door maximum
width Door maximum
height
72120106 44-5/8 ″ (113.3 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
3-1/2" (8.9 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
2"
(5.1 cm)
2" (5.1 cm)
Front Wall End Wall
10" (25.4 cm)
4" (10.2 cm)
72-1/2"
(184.2 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
4-1/2"
(11.4 cm)
4-1/2" (11.4 cm) D.
Drain Cutout
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm)
Max OD
Drain Hole
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
24"
(61 cm)
8"
(20.3 cm)
26"
(66 cm) 35-1/4"
(89.5 cm)
18" (45.7 cm)
or 24" (61 cm)
Grab Bar
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
48"
(121.9 cm) 12"
(30.5 cm)
Grab Bar
Backer board locations
18" (45.7 cm) Grab Bar
16" (40.6 cm)
Product Diagram
ENSEMBLE
TM
ENSEMBLE
TM
48
″ (121.9 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page 2 of 2
1065812-4-
C