Sony BDV-T57 - Manual (Page 16)

16 US
Gettin
g
Star
ted
To add the optional surround back speakers
You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP2,
optional). The optional product lineup differs depending on the area.
For the position of the surround back speakers, refer the illustration below ( C ).
Note
• To use the surround back speakers, set [Surround Back] (page 52) in [Speaker Settings] to [Yes] while performing
the Easy Setup (page 28).
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the front speakers of BDV-E870 on a wall, you need to disassemble the speakers. You
can install the upper part of the speakers on a wall.
Installing the speakers on a wall
45 45
30 30
C C
Front left speaker (L) Front right speaker (R)
Center speaker Subwoofer
Surround back right speaker (R)
(optional) Surround back left speaker (L)
(optional)
Surround left
speaker (L)
Surround right
speaker (R)