Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 32)

32
(Example of settings made with the Image menu)
The Image menu contains the following options:
- “ASPECT operates in the same way as described for the
video menu.
- “COLOR TEMPERATURE CALIB.” operates in the same
way as described for the video menu.
- “GAMMA CORRECTION” operates in the same way as
described for the video menu.
- “POSITION”: used to adjust the position of the image ver-
tically and horizontally on the screen. It will not normally be
necessary to change these settings, as the system analyses
the incoming signal and applies the most suitable values au-
tomatically. All the same, if the image is not perfectly aligned
it can be adjusted as appropriate.
- “FREQUENCY/PHASE”: these are controls applicable
to progressive signals and signals from a computer, which
determine the relationship between the number of pixels
making up the signal and the number of pixels making up
the projected image. It will not normally be necessary to
adjust these settings, as the system analyses the incoming
signal and applies the most suitable values automatically.
All the same, if the image should appear disturbed (loss of
resolution between equidistant vertical bands or instability
and loss of detail on thin vertical lines), the system can be
prompted to re-analyse the input signal and re-calculate the
best parameters; this is done by pressing button [12] on the
remote control to activate the automatic verification proce-
VIDEO ADJUSTMENTS
The quality of the graphic image on the screen can be improved
by way of the options and settings of the Picture menu (displayed
by pressing button [2] once) or the Image menu (displayed by
pressing button [2] a second time).
Picture Menu
[2] first touch: Picture
(Example of settings made with the Picture menu)
The Picture menu contains the following options:
- “BRIGHTNESS” operates in the same way as described
for the video menu.
- “COLOR” operates in the same way as described for the
video menu.
- “CONTRAST” operates in the same way as described for
the video menu.
- “SHARPNESS” operates in the same way as described
for the video menu.
- “SHARPNESS MODE”: used to select the type of pro-
cessing associated with detail control. Advisable selections
are “Video” for progressive or interlaced video signals, and
“Graphics” for graphic signals received from a PC.
Image menu
[2] second touch: Image
Picture
Brightness 100
Contrast 100
Color 100
Sharpness 10
Sharpness mode Video Graphics
Horizontal : 208
Vertical : 28
Image
Aspect < User 2
Color Temperature calibration Medium
Gamma Correction Film
Position >
Frequency 1058
Phase 6
Magnification >