Soundstream Technologies SA 164 - Manual (Page 4)

i HANDCRAFTED IN U.S.A.
Top View (partial)
67 8 9 10
Side View
CHANNELS 2
LOW RANGE
15
\
MAIN FUSE
i
Underside View
2.
3.
4.
5.
6.
7.
6.
9.
10.
11.
12.
13.
14.
15.
v to
2V Connected to fuse or circuit breaker, then battery’s positive post.
Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
Remote Remote turn-on input from the head unit. Accepts
LED Indicates amplifier power on.
Speaker Output Connections Channels 1 2
Input Level Channels 1 variable from to
Inputs Channels 1 2; right and lefl channel inputs; only right channel
input used in “Mono” mode.
Speaker Output Connections Channels 3 4
Input Level Channels 3 4; variable from to
Inputs Channels 3 4; right and lefl channel inputs; only right channel
input used in “Mono” mode
[underside] Stereo/Bridged Mono/Internal Switch (ch 3 4) Select
“Mono” for bridged operation (use only right channel input or stereo
position for 2-channel Stereo or Mixed Mono operation). “Internal” allows
you to use the inputs to channels 1 2 to feed channels 3
[underside] Amplifier Crossover Switch Channels 3 4; select high
pass or full range operation.
[underside] Stereo/Bridged Mono/Remote Switch Channels 1 8 2;
select “Mono” for bridged operation (use only right channel input or stereo
position for 2-channel Stereo or Mixed Mono operation.
[underside] Amplifier Crossover Switch Channels 1 2; select low
pass or full range operation.
[underside] Main Fuse Main power supply fuse. Replace only with
same fuse value.