SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 357)

P
OWER OVER
E
THERNET
C
OMMANDS
4-95
power inline maximum allocation
Use this command to limit the power allocated to specific ports. Use the no
form to restore the default setting.
Syntax
power inline maximum allocation [ milliwatts ]
no power inline maximum allocation
milliwatts - The maximum power budget for the port.
(Range: 3000 - 15400 milliwatts).
Default Setting
15400 milliwatts
Command Mode
Interface Configuration
Command Usage
If a device is connected to a switch port and the switch detects that it
requires more than the maximum power allocated to the port, no power
is supplied to the device (the port power remains off).
Example
power inline priority
Use this command to set the power priority for specific ports. Use the no
form to restore the default setting.
Syntax
power inline priority priority
no power inline priority
priority - The power priority for the port.
Options: 1 (critical), 2 (high), or 3 (low).
Console(config)#interface ethernet 1/1
Console(config-if)#power inline maximum allocation 8000
Console(config-if)#