Sakar 90379 - Manual (Page 31)

31
The Camera will remain in the Web Cam mode until either you manually set the camera to the Transfer mode or
the camera is turned off.
Using Your Camera As A Web Cam
1. Make sure the Camera is in the Web Cam Mode (Mode 2)
2. Connect the camera to the computer.
3. Open a Web Cam enabled application, such as Instant Messenger or Net Meeting.
4. Position the camera.
Web Cam Express
Now that you have your camera installed you can use it to capture short movies called AVI files. These can be
saved directly to your computer. The length of time you can record an AVI while the camera is connected to
your computer will vary, depending on how much hard drive space you will use to save the file. Please take note
that these AVI files take up a lot of hard drive space. This is done through the PhoTags WebCam Express
program. This next section will walk you though capturing an AVI file.
1. Make sure that your camera is connected via the USB cable to your PC.
2. Double-click the “WebCam Express” icon that is on your desktop. This will launch the PhoTags
Web Cam Express program.