Sony PCWA-C150S - Manual (Page 45)

45
Software setup
• Check the Network Name (also called SSID) and the Data
Security (also called WEP or Encryption) settings of the Access
Point. For details about these settings, consult your network
administrator. The factory-default configuration settings for the
Access Point are listed in the Access Point documentation.
Note
Before configuring the Wireless LAN PC Card, perform the following steps to confirm
that the “Use Windows to configure my wireless network settings” check box is
selected. This option is selected as the default setting.
To confirm that the “Use Windows to configure my wireless
network settings” check box is selected:
1.From the “Start” menu, select “Control Panel”, and double-click
“Network Connections”.
2.Right-click “Wireless Network Connection”, and click
“Properties”.
3.Click the “Wireless Network” tab.
4.Confirm that the “Use Windows to configure my wireless network
settings” check box is selected. If it is not selected, select the
check box.
1
Right-click the Wireless Network Connection icon in the
notification area of the taskbar. In the shortcut menu that
appears, select “View Available Wireless Networks”.
The Connect to Wireless Network dialog box appears.
2
Click the Access Point to which you want to connect.