Sharp MD-M2H - Manual (Page 38)

37
■ Move
4
Select the new track position pressing the
or button.
● To cancel the operation, press the ■ button.
5
Press the ENTER button again.
● The track is moved, and the unit is stopped at
the beginning of the new track selected in step
4.
Notes:
● When a track has been moved, the other tracks
which are affected will be assigned new track
numbers automatically.
● This function cannot be used in the random play
mode and APMS play mode.
Example:
When moving the fifth track to the third track, the
old third track will become the new fourth track, and
the old fourth track will become the new fifth track.
1
Whilst in the stop mode, select the track you
want to move pressing the
5 3
or
2 4
button.
Or start playing the track to be moved, and then
press the
0 6
button.
2
Press the NAME/TOC EDIT button, and within
10 seconds, select “MOVE” pressing the
or button.
3
Within 10 seconds, press the ENTER button.
3,5
H
1
2
1
2
4
(Remote control operation)
(Continued)
To combine two non-contiguous tracks:
(Example: the first and third tracks)
Move the third track to the second track using the
MOVE function.
Then, combine the first and second tracks using
the COMBINE function.
Notes:
● Tracks recorded from analogue inputs cannot be
combined with tracks recorded from CDs or MDs
using the digital inputs.
● Tracks recorded in the stereo mode cannot be
combined with tracks recorded in the monaural
long-play mode.
● Tracks where either track’s recording time is less
than 15 seconds may not be combined.
● This function cannot be used in the random play
mode and APMS play mode.