Sony CDX-M670 - Manual (Page 26)

26
Changing the sound and
display settings
— Menu
The following items can be set:
Set Up
• Clock (page 9)
• Beep — to turn the beeps on or off.
• Multi language (language selection) — to
change the display language to English,
French, Spanish.
• P.Out 4.0V/5.5V— to change the pre-out of the
power amplifier to 4.0V or 5.5V. Selectable
only when the unit is turned off. (CDX-M770
only)
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
Functions only when SA is not set to B-1 – B-3.
• SA (Spectrum Analyzer) (page 25) — to
change the display pattern of the equalizer
display.
• M.Dspl (Motion Display) — to turn the Motion
Display mode on or off.
– Select “on” to show decoration lines in the
display and activate Demo display.
– Select “off” to deactivate the Motion Display.
• Dimmer — to change the brightness of the
display.
– Select “Auto” to dim the display only when
you turn the lights on.
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognisable
because of the unit’s installation position.
• A.Scrl (Auto Scroll)
– Select “on” to scroll all automatically
displayed names exceeding 8 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
Sound (CDX-M670/M620 only)
• HPF (High pass filter) (page 23)
• LPF (Low pass filter) (page 23)
• Loud (Loudness) (page 23)
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with
stronger signals.
• Mono on/off* (Monaural mode) (page 14)
– Select “on” to hear FM stereo broadcast in
monaural. Select “off” to return to normal
mode.
* This function cannot change the TV sound
setting if the optional TV tuner is connected.
• IF Auto/Wide (page 14)
1
Press (MENU) .
To set A.Scrl, press (MENU) during CD/MD
playback.
2
Press M or m repeatedly until the
desired item appears.
3
Press , to select the desired setting
(Example: “on” or “off”).
4
Press (ENTER) .
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
M
or m for 2 seconds.