General safety instructions safety labels, General safety instructions, Safety labels – Shindaiwa T272X User Manual

Page 3

Advertising
background image

3

Work Safely

Trimmers and brushcutters operate at very

high speeds and can do serious damage

or injury if they are misused or abused.

Never allow a person without training or

instruction to operate your unit!

Stay Alert

You must be physically and mentally fit

to operate this unit safely.

WARNING!
Never operate

power equipment of any
kind if you are tired or if you are under

the influence of alcohol, drugs, medica-
tion or any other substance that could
affect your ability or judgment.

General Safety Instructions

ALWAYS wear eye protection to shield
against thrown objects.

NEVER operate the engine when trans-
porting the unit.

NEVER operate the engine indoors!
Make sure there is always good ventila-
tion. Fumes from engine exhaust can
cause serious injury or death.

ALWAYS clear your work area of trash
or hidden debris that could be thrown
back at you or toward a bystander.

ALWAYS use the proper cutting tool for
the job.

ALWAYS stop the unit immediately if
it suddenly begins to vibrate or shake.

Inspect for broken, missing or improp-
erly installed parts or attachments.

NEVER extend trimming line beyond

the length specified for your unit.
ALWAYS keep the unit as clean as practical.
Keep it free of loose vegetation, mud, etc.

ALWAYS

hold the unit firmly with both

hands when cutting or trimming, and
maintain control at all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire
before performing any maintenance work.

ALWAYS, if a blade should bind fast in
a cut, shut off the engine immediately.
Push the branch or tree to ease the
bind and free the blade.

WARNING!
Never make unauthorized

attachment installations.

IMPORTANT!

Safety and Operation Information Labels:

Make sure all information labels are

undamaged and readable. Immediately

replace damaged or missing information

labels. New labels are available from your

local authorized Shindaiwa dealer.

T272X

T272

This label indicates the minimum

distance between front handle and rear

grip per ANSI B175.3.

POSITION HANDLE

FORWARD OF THIS LINE

Safety Labels

Figure 1

WARNING!
USE Good JUdGmENt

Advertising
This manual is related to the following products: