Sanyo Xacti VPC-E760 - Manual (Page 27)

Camera Setup 13
Inserting an SD/MMC Memory Card
E
nglish
Inserting an SD/MMC Memory Card
The camera features 16 MB internal flash memory but you may also use an optional
SD/MMC memory card for additional storage.
Follow these instructions to insert the SD/MMC card.
1. Open the battery com-
partment at the bottom
of the camera.
2. Insert the SD/MMC card into the memory card slot
as shown.
3. Close the battery
compartment.
To remove the SD/MMC card, gently push the card until it pops out. Pull out the
card carefully.
Charging the Battery
Insert the battery into the battery charger as
shown. Connect the power supply to the charging
unit and the mains supply.
Turning On
Press and hold the Power button to turn on the camera. To turn off the camera,
press the Power button again.