Soleus Air PE4-11R-03 - Manual (Page 5)

5
INSTALLATION
SELECTING THE LOCATION
Place the unit on a flat surface in an area where
the outlets are not obstructed. Place the unit at
least 20” away from all adjacent walls.
MOUNTING THE EXHAUST HOSE
Slide the square front end of the exhaust
duct over the hot air outlet on the back of
the unit.
The exhaust hose should be kept as
short and straight as possible. Prevent
any sharp bends in the exhaust hose, as
this will trap hot exhaust air and cause
the unit to run less efficiently.
The hot exhaust air can be vented through the
wall or out a window. If mounting in the wall, the
height of the hole should be 16 to 50 inches
(40cm to 130cm).