SANRAD I3.1.1205 - Manual (Page 185)

Chapter 9: Routine Volume Maintenance 9-7
Removing an iSCSI Target
If you are working in
a V-Switch cluster,
the target must be
removed on both V-
Switches.
You can remove an iSCSI target provided it has no attached LU. Use the
CLI command lu remove to first remove any LUs from a target.
iscsi target remove
You need to define one parameter to remove an iSCSI target:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ta TARGET ALIAS ALIAS OF I SCSI
TARGET TO REMOVE
MANDATORY musicbox
Example:
iscsi target remove –ta musicbox
Removing a RADIUS Server
Use the CLI command ip radius remove to remove a RADUIS server from
the V-Switch.
ip radius remove
You need to define one parameter to remove an iSNS server address:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS OF
RADIUS SERVER
MANDATORY 212.199.43.1
-p PORT UDP PORT FOR
SENDING REQUESTS
TO
RADIUS
SERVER
MANDATORY 1812
Removing an iSNS Server
Use the CLI command ip isns remove to remove an iSNS server from the
V-Switch iSNS client.
ip isns remove
You need to define one parameter to remove an iSNS server address:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS OF
I SNS SERVER
MANDATORY 212.199.43.1