Sony PAL NTSC 4.43 SLV-SE80UX - Manual (Page 46)

Basic Operations
46
Setting the timer manually (continued)
2
Set the date, start and stop times,
programme position, tape speed, and
VPS/PDC function:
1 Press / to highlight each item in turn.
2 Press >/. to set each item.
To correct a setting, press ? to return to
that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” below.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
the VPS/PDC function, see “Timer recording with VPS/PDC
signals” on page 43.
• To record from another source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3” in the
“PROG.” position.
3
Press MENU to exit the menu.
4
Press I /u to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording.
To record from another source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
., the indication changes as shown below. Press > to change the indication
in reverse order.
OK
PLAY
INPUT SELECT
MENU
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU EXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 5 1 9 : 0 0 2 0 : 0 0 3
SP VPS / PDC OFF
TUE 2 8 . 9
TODAY n SUN-SAT (Sunday to Saturday) n MON-SAT (Monday to Saturday)
n MON-FRI (Monday to Friday) n SAT (every Saturday) .....
n MON (every Monday) n SUN (every Sunday) n 1 month later
n (dates count down) n TOMORROW n TODAY