Attaching the supplied tripod adapter, Attaching the supplied grip handle – Sharp VL-NZ10S User Manual

Page 56

Advertising
background image

Useful Features

Useful Features
Camera Recording

41

Attaching the Supplied
Tripod Adapter

Attach the supplied tripod adapter when using
a tripod with the camcorder.

1

Align the tripod adapter with the tripod
adapter socket on the bottom of the
camcorder, then rotate as shown below.

2

Attach tripod to tripod socket.

Note:
• You cannot use the supplied tripod adapter, if

the alignment pin is not retractable.

Attaching the Supplied Grip
Handle

Attach the supplied grip handle when you want
to steady the camcorder with your right hand
during recording.

Align the grip handle with the tripod adapter
socket on the bottom of the camcorder, then
rotate as shown below.

Caution:
Do not pick up the camcorder by the grip

handle, as this may damage the equipment.

Tripod adapter socket

Tripod socket

Advertising
This manual is related to the following products: