Sharp O2 - Manual (Page 59)

Profiles 58
3. Press or to select “Preset Melody” or
“Sound Gallery”, followed by .
4. Select the ringing tone you wish to use by pressing
or .
If you wish to hear the demo, press [Play].
To stop playing, press [Stop].
5. When selection is complete, press .
Vibration
When the vibrator option is set to on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
2. Press or to select “Vibration”, then press
.
3. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ringing
tone. However, this function may not work depending
on data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” appears on the stand-by screen.
Keypad Tones
When the keypad tone is set to on, you will hear a
confirmation tone each time you press a numerical key.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
2. Press or to select “Keypad Tones”, then
press .
3. Press or to select “On” or “Off”, then press
.
If you select “Off”, the screen returns to step 1.
4. Set “Volume”, then press .
5. Press to increase the volume or press to
decrease the volume, then press .
6. Press or to select “Melody”, then press .
7. Press or to select either “Preset Melody”,
“Sound Gallery” or “Default Tone”, then press .