Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 104)

74 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
16. Update MANPATH to access cfgadm_fp (1M) man page.
For sh or ksh , type:
For csh , type:
17. Install StorTools package SUNWvtsst.
If you plan to used your system as a SAN Management host, install Step 17, Step 18,
and Step 19.
18. Install Network Storage Agent package SUNWrasag .
19. Install Sun StorEdge Network FC Switch Manager package SUNWsmgr
Not all installations require the SUNWsmgr package. Install it only on the SAN
Management host..
20. Reboot the system.
For a sample installation session, see Appendix D.
For each of the storage devices, upgrade the software, firmware, or configuration.
The components should be upgraded to the revision levels outlined in Table 3-1
“Minimum Software Component Versions and Patches” on page 36 in chapter 3.
After the above steps, you can leverage additional features provided by Sun
StorEdge FC network switch-8 and switch-16, version 3.0. You can configure the
SAN for:
■ Sun StorEdge Traffic Manager functionality
■ Solstice DiskSuite functionality
■ FCIP functionality
■ additional fabric zones
# MANPATH=/opt/SUNWsan/man:$MANPATH;export MANPATH
% setenv MANPATH /opt/SUNWsan/man:$MANPATH
# pkgadd -d pkg-location SUNWvtsst
# pkgadd -d pkg-location SUNWrasag
# pkgadd -d pkg-location /SUNWsmgr