Replacing the toner cartridge – Samsung ML-3470D User Manual
Page 41

8
.4
<Maintenance>
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
4
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
5
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
6
Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
When the toner cartridge is completely empty:
• Toner Low Replace Toner appears on the display.
• The Smart Panel program window appears on the computer telling
you that the toner cartridge is empty.
• The Status LED blinks red.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 7.1.
1
Open the front cover.
2
Pull the toner cartridge out.
3
Remove the new toner cartridge from its bag.
Caution
Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
4
Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
Cautions
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the toner cartridge, do not expose it
to light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge
. Use the handle on the cartridge to avoid touching
this area.
5
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
6
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
7
Close the front cover. Make sure that the cover is securely closed.