Sony CPD-100SFT - Manual (Page 3)

3
EN
Introduction .............................................................................. 3
Precautions ...............................................................................3
Getting Started .........................................................................4
Using Your Monitor ................................................................ 4
Adjustments .............................................................................. 5
Entering New Timings ............................................................ 8 Power Saving Function ........................................................... 8
Plug and Play ........................................................................... 8
Use of the Tilt-Swivel .............................................................. 8
Damper Wire ............................................................................ 8
Specifications ............................................................................ 9
Troubleshooting ..................................................................... 10
Table of Contents
Introduction
Congratulations on your purchase of a Sony Multiscan
100sf/200sf!
This monitor incorporates over 25 years of Sony experience
with Trinitron display technology, ensuring excellent
performance and outstanding reliability. The Multiscan
100sf/200sf’s wide scan range (Multiscan 100sf: 30 – 70 kHz,
Multiscan 200sf: 30 – 80 kHz), together with Digital
Multiscan Technology, allows it to sync to any video mode
from standard VGA through VESA 1024
×
768 at 85 Hz,
VESA 1280
×
1024 at 75 Hz (Multiscan 200sf only).
In addition, its two factory preset color modes and one user
adjustable color mode give you unprecedented flexibility in
matching on-screen colors to hard copy printouts.
Furthermore, the Multiscan 100sf/200sf feature digital
controls, raster rotation, power saving, low emissions, and
much more. All together, it delivers incredible performance
with the quality and support you can expect from Sony.
Installation
•
Prevent internal heat build-up by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
•
Do not install the unit near heat sources such as radiators
or air ducts, nor in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
•
Do not place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Precautions
Maintenance
•
Clean the cabinet, glass panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
•
Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ball point pen or a screw
driver. Otherwise, this type of contact may result in a
scratched picture tube.
Warning on Power
Connection
•
Use the supplied power cord.
For the customers in U.S.A.
If you do not do this, this monitor will not conform to
mandatory FCC standards.
For the customers in UK.
If you use the monitor in UK, please use the supplied UK
cable with UK plug.
Transportation
When you transport this monitor for repairing or shipping,
use the original carton box and packing materials.
for 100 to 120 V AC for 240 V AC only for 220 to 240 V AC
• Before disconnecting the power cord, wait for at least
30 seconds after turning off the power switch to allow for
the discharging of static electricity on the CRT display
surface.
• After the power has been turned on, the CRT is
demagnetized for approximately 5 seconds. This generates
a strong magnetic field around the bezel which may affect
the data stored on magnetic tape or disks near the bezel.
Place such magnetic recording equipment and tapes/disks
at a distance from this unit.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.