Sony PCV-MXS10 - Manual (Page 46)

Change to Current Document Title
46
5 Select the appropriate port, usually LPT1, and then click Next.
6 Select the appropriate printer manufacturer and model.
7 Follow the onscreen instructions to print a test page and complete printer
installation.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode.
Clear the printer memory by turning the printer off for approximately 10 seconds,
and then turning it back on.
To contact Sony for technical support
For further technical assistance, call 1-888-4-SONY-PC (1-888-476-6972) or
access the Web site at: http://www.sony.com/pcsupport.
Notes on Use
The power source
❑ Your computer operates on 100–120 V AC 50/60 Hz only.
❑ Plug all the power cords for your computer and its peripheral equipment into
the same AC supply line. AC derived from different supply lines may result
in voltage differences that can cause unstable operation or unwanted weak
currents at the time of connection.
✍
Place a check mark in the box for “Automatically detect and install my Plug and Play
printer”, if you are installing a recently manufactured printer with Plug and Play
capability.
✍
If the printer is not included in the list and the printer manufacturer included a disk
with a Windows XP Printer driver, choose Have Disk, enter the appropriate path for the
disk or CD and click OK.
If the printer is not included on the list and no drivers are included with the printer,
choose an alternate printer driver that your printer may emulate. Refer to the manual
that came with your printer for specific emulation information.