Sportline Cardio 660 - Manual (Page 8)

14 15
CARDIO 660 HEART RATE MONITOR
SETTING PERSONAL PROFILE
1. Select Gender by PRESSING S/S/R or L/V .
Set and advance by PRESSING MODE .
2. Adjust Year of Birth by PRESSING S/S/R or
L/V . Set and advance by PRESSING MODE .
3. Select Units of Measure (Imperial=LB
or Metric=KG) by
PRESSING S/S/R or L/V .
Set and advance by PRESSING MODE .
4. Adjust Height by PRESSING S/S/R or L/V .
Set and advance by PRESSING MODE .
5. Adjust Weight by PRESSING S/S/R or L/V .
Set and advance by PRESSING MODE .
6. Select Fat Burn Zone ON or OFF by
PRESSING S/S/R or L/V . Set and advance
by PRESSING MODE .
7. Adjust Lower Fat Burn Zone Range by
PRESSING S/S/R or L/V . Set and advance
by PRESSING MODE .
NOTE: This is a % of Max Heart Rate (automatically
calculated by the monitor).
8. Adjust Upper Fat Burn Zone Range by
PRESSING S/S/R or L/V . Set and advance
by PRESSING MODE .
9. Adjust Display Contrast by PRESSING
S/S/R or L/V . Set by PRESSING MODE . The
display will read “Saved!”
Your Sportline Cardio 660 is now ready for
use!
SETTING TIME, CALENDAR AND USER PROFILE
The Sportline Cardio 660 uses your personal profi le to calculate
information specifi c to you. The display in the programming se-
quence guides you through the settings. You adjust the informa-
tion being programmed by
PRESSING START/STOP/RESET (S/S/R)
to increase or LAP/VIEW (L/V) to decrease. You set the informa-
tion and advance to the next fi eld by PRESSING MODE . The display
reads “Saved” when this sequence is complete. The monitor is
then ready for use. You may exit the Programming Sequence at
any time by
PRESSING & HOLDING the MODE key.
PRESS & HOLD the MODE key In Time of Day
mode to enter the Programming Sequence.
SETTING TIME & CALENDAR
1. Adjust Hour by PRESSING START/STOP/
RESET (S/S/R) or LAP VIEW (L/V) . Set and
advance by PRESSING MODE .
2. Repeat Step 1 to set Minutes, Seconds,
Month, Day and Year.
3. Select 12- or 24-hour time format by
PRESSING S/S/R or L/V . Set and advance
by PRESSING MODE .
4. Select Key Tone ON or OFF by PRESS-
ING S/S/R or L/V . Set and advance to
personal profi le by PRESSING MODE .
PROGRAMMING THE MONITOR PROGRAMMING THE MONITOR
Increase: S/S/R
Decrease: L/V
Set & advance
to next setting:
PRESS MODE
Increase: S/S/R
Decrease: L/V
Set & advance
to next setting:
PRESS MODE
Increase: S/S/R
Decrease: L/V
Set & advance
to next setting:
PRESS MODE
SP1446IS01SPO.indd 14-15 SP1446IS01SPO.indd 14-15 6/13/11 11:28 AM 6/13/11 11:28 AM