Sony UP-970AD User Manual
Page 18
A
n
al
o
g
M
o
de
Adjustments and Settings Using the Menu
18
QTY
To set the print
quantity
[QT:1] to QT:10: Prints
from one to ten copies of
the same image.
BACK: Cancels the setting
change and returns to the
item selection column.
SAVE
To register up to
three kinds of
settings
SA:3: Registers the menu
settings as No.3.
SA:2: Registers the menu
settings as No.2.
[SA:1]: Registers the menu
settings as No.1.
BACK: Cancels the setting
change and returns to the
item selection column.
SCAN
(for the UP-
970AD only)
To set the size of
the captured
image.
SC:WD2: Maximum size
[SC:WD1]: Medium size
SC:NOR: Minimum size
BACK: Cancels the setting
change and returns to the
item selection column.
SFT.H
(UP-990AD)
To specify the
horizontal
position of the
image to be
printed.
[S.H:192]: Moves the print
area horizontally relative to
the captured image. The
numeric value displayed by
turning the jog dial depends
on the “SIZE.H” setting
and the signal system.
BACK: Cancels the setting
change and returns to the
item selection column.
SFT.H
(UP-970AD)
To specify the
position in the
horizontal
direction of the
image to be
printed.
[H:0]: Adjusts the
horizontal position. The
numeric value displayed by
turning the jog dial depends
on the signal system of the
image to be captured and
the range setting of images
captured with “SCAN”.
BACK: Cancels the setting
change and returns to the
item selection column.
SFT.V
(UP-990AD)
To specify the
vertical position
of the image to be
printed.
[S.V:20]: NTSC signal
input.
[S.V:28]: PAL signal input.
Adjusts the vertical position
of the printing area relative
to the captured image. The
numeric value displayed by
turning the jog dial depends
on the “SIZE.V” setting
and the signal system.
BACK: Cancels the setting
change and returns to the
item selection column.
Item
Function
Settings
SFT.V
(UP-970AD)
To specify the
position in the
vertical direction
of the image to be
printed.
[V:0]: Adjusts the vertical
position. The numeric value
displayed by turning the jog
dial depends on the signal
system of the image to be
captured and the range
setting of images captured
with “SCAN”.
BACK: Cancels the setting
change and returns to the
item selection column.
SHARP
To adjust the
sharpness of the
printout
[SH:0] to SH:14:You can set
the sharpness to any of 15
steps from 0 to 14. A higher
number indicates greater
sharpness. A setting of “0”
indicates that the function is
off, which is also the
default value.
BACK: Cancels the setting
change and returns to the
item selection column.
SIDE
c)
To select the
direction in which
the image is to be
printed
S:SIDE: Prints the image
rotated by 90 degrees
counterclockwise.
[S:STD]: Prints the image in
the same direction as that
displayed on the monitor.
BACK: Cancels the setting
change and returns to the
item selection column.
SIZE.H
(for the UP-
990AD only)
To set the number
of dots in the
horizontal
direction of the
printed image.
[H: 1202]: NTSC signal
input.
[H: 1202]: PAL signal input.
Changing the value
increases or decreases the
number of horizontal dots
to the right of the fixed left
edge of the image.
BACK: Cancels the setting
change and returns to the
item selection column.
SIZE.V
(for the UP-
990AD only)
To set the number
of dots in the
vertical direction
of the printed
image.
[V:480]: NTSC signal input.
[V:574]: PAL signal input.
Adjusts the vertical position
of the bottom edge with
respect to the fixed top edge
of the image.
BACK: Cancels the setting
change and returns to the
item selection column.
TRAP
To select the
input signal to be
printed
TR:ON: Prints the color
signal.
[TR:OFF]: Prints the black
and white signal.
BACK: Cancels the setting
change and returns to the
item selection column.
Item
Function
Settings