Kenwood DPX-MP2090U - Manual (Page 35)

AUX IN
– +
P.CONT
MUTE
ANT. CONT
ILLUMI
FRONT L
FRONT R
REAR L
REAR R
EXT. CONT
FM/AM
antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
To Kenwood disc changer/
External optional accessory
Wiring harness
(Accessory
1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left
speaker
To front right
speaker
To rear right
speaker
To rear left
speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
To connect these leads, refer to the
relevant instruction manuals.
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
When using the optional power amplifier, connect
to its power control terminal.
To car light control switch
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
TEL mute wire (Brown) Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To connect the Kenwood navigation
system, consult your navigation manual.
AUX left input (White)
AUX right input (Red)
Rear left output/ Sub Woofer left output (White)
Rear right output/ Sub Woofer right output (Red)
External amplifier control wire
(Pink/Black)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
English | 35
Connecting Wires to Terminals