Konica Minolta Konica Digital Revio KD-300Z - Manual (Page 28)

49 48
Erasing Individual Images
<Operation>
1 Press the “MENU” button.
Press the “ #” or “@” button to
select [ERASE].
2 Press the “ ” button.
3 Press the “ @” or “#” button to
select the picture you wish to
erase.
Erasure Prevention (Image Protect Function)
This function can be used to place a protective lock on individual
pictures, preventing the inadvertent erasure of important images on
your memory cards. This function is particularly convenient when used
when erasing multiple images, or using the all-erase function (page 50).
<Operation>
1 Press the “MENU” button.
Press the “ #” or “@” button to
select [PROTECT].
2 Press the “ ” button.
3 Press the “ @” or “#” button to
select the picture you wish to
protect.
4 Press the “ ” button to
confirm the selection and
complete the operation.
¶ To unprotect an image, repeat the
above procedure.
To continue by placing protection
on other images, repeat steps 3-
4.
To cancel or interrupt the function,
select [RETURN], followed by the
“
” button, or else press the
“MENU” button.
¶ After setting the protect function,
you can confirm your selections by
displaying the information screen
(page 46), or by using the multiple
image display function (page 47)
and looking for the lock mark [ ]
on the image.
4 Press the “ %” button to select
[EXECUTE].
5 Press the “ ” button to
confirm the selection and erase
the image.
¶ When an image is erased, the next
image on the card will be displayed
automatically.
To erase other images, repeat
steps 3-5.
To cancel or interrupt the function,
select [CANCEL], followed by the
“
” button, or else press the
“MENU” button.
2001.7.6, 6:12 PM Page 48-49