Kenwood KDC-9017 - Manual (Page 17)

Function of the KDC-X917/KDC-X817/KDC-X717
Adjust the Non-fading output level.
Display and setting:
"NF Level" : - 15 – + 15
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.
NOTE
Non-Fading Level
Adjust the fader level.
Display and setting:
"Fader" : Rear 15 – Front 15
Fader Level
Adjust the balance level.
Display and setting:
"Balance" : Left 15 – Right 15
Balance Level
Adjust the treble level.
Display and setting:
"TRE" : - 8 – + 8
Treble Level
Function of the KDC-X917/KDC-X817/KDC-X717
Adjust the center frequency of the treble.
Display and setting:
"TRE FRQ" : 10.0 / 12.5 / 15.0 / 17.5 kHz
Treble Center Frequency
Function of the KDC-X917/KDC-X817/KDC-X717
Adjust the middle quality factor.
Display and setting:
"Middle Q" : 1.0 / 2.0
Middle Quality Factor
Adjust the middle level.
Display and setting:
"MID" : - 8 – + 8
Middle Level
Function of the KDC-X917/KDC-X817/KDC-X717
Adjust the center frequency of the middle.
Display and setting:
"MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz.
Middle Center Frequency
— 17 —
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 17