Kalorik USK DA 31066 - Manual (Page 5)

5 DA31066 / 31067 - 091112
Assembly page 5/16
CAUTION BEFORE FIRST USE
• The iron has been greased, and as a result, the iron may slightly
smoke when switched on for the first time. After a short while, this
will cease.
• Before using for the first time, remove any sticker or protective foil
from the soleplate. Clean the soleplate with a soft cloth.
• Keep the soleplate smooth: avoid hard contact with metal
objects (such as clothes rack, button and slide fastener).
FILLING THE WATER TANK
• Use preferably demineralized water.
• Make sure the iron is unplugged from the outlet
• Turn the temperature dial to "MIN" and the variable steam dial to
the "0" setting.
• To fill the water tank, open the lid of the filling opening and pour
water through the fill opening, the iron put at an angle of 45°,
using the beaker. Never exceed the MAX mark indicated in on
the appliance.
• When ironing, unplug the appliance before refilling. Fill the water
tank by holding the appliance in 45° angle position without
putting down the hot soleplate, unless you have a heat-resistant
base.
TEMPERATURE SETTINGS
• You can choose the temperature setting in function of the
material of cloth to iron.
• In order to turn the iron to the desired temperature, please turn the
temperature knob clockwise into the required position (see table
below). If you have a doubt, take a look at the garment’s label.