Kathrein UFD 400 - Manual (Page 16)

Receiver operation
16
•
Exit from the menu with key the key.
Radio programmes can be inserted, swapped or copied using the same method in
“radio” mode.
Operation without remote control
If you happen to have mislaid the remote control handset, you can switch the re-
ceiver between “TV” and “Radio” mode by simultaneously pressing both the
buttons on the front of the unit.
Displaying programme overview
The unit is in normal mode (TV or radio mode).
•
Press the key.
The programme overview appears on the screen.
The currently selected programme is identified by <...> .
•
The keys can be used to single-step through the programme list while the
keys allow paging in steps of 10.
•
Pressing the key once results in switchover to the marked programme. On
exiting the programme overview with key, there is a switch back to the pre-
vious programme.
•
Pressing the key twice results in switchover to the marked programme and
exit from the programme overview.
•
To exit from the menu without selecting a programme press key
.
Info menu
•
Press the key whilst the programme list is overlaid.
The Info menu appears with instructions for calling up the setup menus for the ini-
tial setup, video and audio settings.
Exit from the menu with keys , or .
Stop-watch
Pressing key starts a stop-watch. A further pressing of the key removes the
stop-watch from the display again.