Kodak DC200 - Manual (Page 45)

5-1
5
Installation
5
Installation
Software
KODAK Installation Software (Installation software) quickly and easily installs
the software included on the DC200/DC210 CD to your computer.
WINDOWS System Requirements
✔
WINDOWS 95, WINDOWS 98, or WINDOW NT System Software
✔
Personal computer with 486/66MHz microprocessor minimum,
PENTIUM Processor recommended
✔
8 MB or more of RAM available, 16 MB recommended
✔
available serial port and CD-ROM drive
Installing the Software
While the Installation software is automatically loading your software, take a few
minutes to fill out and send in the DC200/DC210 product registration card. This
allows you to receive information regarding software updates and registers some
of the products included with the camera.
Close all other applications before starting the Installation software.
1 Place the DC200/DC210 CD into your CD-ROM drive.
☞
If Auto Run is turned on in WINDOWS 95, WINDOWS 98, or
WINDOWS NT, the first install window automatically appears.
Proceed to step 4. If the first install window does not automatically
appear proceed to step 2.
2 Choose Run from the Start menu.
3 Type the path to the drive that contains the CD and then type \setup.exe
For example: d:\setup.exe
Chap1newBook Page 1 Friday, February 5, 1999 7:02 AM