Starting the slide show, Changing the display interval – Kodak DX3500 User Manual
Page 36
28
Chapter 3
Starting the Slide Show
1
Turn the Mode dial to Review
and press the Menu button.
2
Highlight the Slide Show menu
, then press the Select button.
3
Highlight Begin Show, then press Select.
The pictures in the camera (from
internal memory or Picture Card,
depending on your picture storage
location) are each displayed once, in the
order in which you took them. Then the
camera returns to the Menu screen.
4
To cancel the Slide Show, press Select.
NOTE: If you connect or disconnect the video cable while a slide show is
running, the slide show stops. When you restart it, by selecting Begin
Show, it begins again with the first picture in your camera.
Changing the Display Interval
The factory interval setting displays each picture for 5 seconds. You can
increase the display interval to up to 60 seconds.
1
On the Slide Show screen, highlight Interval, then press Select.
2
Select how long you wish to display each picture (5-60 seconds).
To scroll through the seconds menu faster, hold an arrow button
down.
3
Press the Select button.
The interval setting remains until you change it.