Kodak DC5000 - Manual (Page 59)

51
5
Setting a Flash Default
Adjust your camera so that it is set to a specific flash setting every time you turn
on the camera. For more information about the Flash setting, see page 15.
Setting a White Balance Default
If you are always using your camera indoors where flash is prohibited, you can
set the camera so it is balanced for the type of light source that you take pictures
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to turn
on the camera.
The main Camera Setup screen appears.
3 Press a button until the icon is
highlighted.
4 Press the DO-IT button.
The Flash Default screen appears. The
current setting is checked (
ä).
5 Press a button until the Flash option
you want is highlighted.
q
AUTO (Main Default)—flash fires
when needed. Ideal for everyday picture-
taking situations.
q
FILL—flash fires every time you take a
picture. Ideal for pictures outside under
heavy shade.
q
RED EYE—flash fires once so the eyes
become accustomed to the flash, then
fires again when the picture is taken.
Ideal for pictures of people.
q
OFF—flash does not fire. Ideal for taking
pictures where flash is prohibited.
6 Press the DO-IT button to accept the changes
and return to the main Camera Setup screen.
Menu
Capture
Setup
Review
/
/