KTM 450 EXC-R EU - Manual (Page 20)

OPERATING ELEMENTS
18

Display mode SPEED/TR2 (trip master 2)
400324-01
ದ Press the button b briefly and repeatedly until TR2 appears at the top right of the
display.
TR2 (trip master b2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button b"+" and the buttonb"ತ". A very
practical function for rides by the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
ton
b"+" and the buttonb"ತ".
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the button b"+". Increases value of TR2.
Press the button b"ತ". Reduces value of TR2.
Press the button b
for 3 - 5 seconds.
Deletes value of TR2.
Press the button b
briefly.
Next display mode

Disply mode SPEED/A1 (average speed b1)
400325-01
ದ Press the button b briefly and repeatedly until A1 appears at the top right of the
display.
A1 (average speed 1) shows the average speed calculated using TR1 (trip master 1) and
S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel sensor and
ends 3 seconds after the last impulse.
Press the button b"+". No function
Press the button b"ತ". No function
Press the button b
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the button b
briefly.
Next display mode

Display mode SPEED/A2 (average speed 2)
400326-01
ದ Press the button b briefly and repeatedly until A2 appears at the top right of the
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch
b2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
timed after the ride.
Press the button b"+". No function
Press the button b"ತ". No function
Press the button b
for 3 - 5 seconds.
ದ
Press the button b
briefly.
Next display mode