Konica Minolta bizhub 180 - Manual (Page 136)

6.1 Single-Sided Copies 6
bizhub 180 6-3
A
dv
anc
ed
Cop
y
O
p
er
ati
ons
Ch
apt
er
6
4 Specify the desired copy settings.
For details, refer to “
To make a simple copy ” on page 3-2 .
? Do you know the copy order for the 4in1 copy function?
➜ The copy order can be set to one
of the two shown at the right. For
details, refer to “
To set the “ 4IN1
COPY ORDER ” function ” on
page 7-52 .
The default setting is PATTERN1.
5 Using the 10-key pad, enter the number of copies to be made.
❍ If multiple copies are to be printed, press the [Finishing] key until “Sort” is
selected.
6 Place the next document page on the
Original glass, and then press the
[Yes] key.
❍ Repeat this step for all pages of
the document.
❍ The number of document pages
that have been scanned is displayed.
7 After all document pages have been scanned, press the [Start] key.
✎
Note
If the document is placed on the Original glass and 2in1 or 4in1 copies are being
produced, the copy job cannot be interrupted.
1 3
2 4
1 2
3 4
PATTERN1 PATTERN2