Kenwood DPX701 DPX501 - Manual (Page 43)

English | 43
Function of the DPX701
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Push the Control knob towards [FM] or [AM].
Select the "AMS Control" display.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards [ 4] or
[ ¢].
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
Other than Standby mode
Traffic Information
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
Display Setting
"TI : OFF"/ "TI OFF" The Traffic Information function is OFF.
"TI : ON"/ "TI ON" The Traffic Information function is ON.
When it is ON, the "TI" indicator is ON. (DPX501
only)
When a traffic information station isn’t being
received the "TI" indicator blinks.
When a traffic bulletin starts, "Traffic INFO"/
"TRAFFIC" is displayed it and it switches to traffic
information.
• During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.
Receiving other traffic information stations
(In tuner source)
Push the Control knob towards [ 4] or
[ ¢].
• You can change the traffic information station when
listening to the radio.
Function of the DPX701
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display Setting
"AMP FREQ : Normal" Boost with the normal central frequency.
"AMP FREQ : Low" Drop the normal central frequency 20%.